Mitsubishi PLC AJ65SBTB1-32T
Description
Output format : Transistor output (sink type)
Output points : 32 points
Rated load voltage : DC12 / 24V
Operating load voltage range : DC 10.2 to 26.4 V (within 5% ripple rate)
Maximum load current : 0.5A / 1 point, 4.8A / 1 common
Maximum inrush current : 1.0A 10ms or less
OFF current leakage current : 0.25 mA or less
Maximum voltage drop when ON : DC 0.3 V or less (TYP.) 0.5 A, DC 0.6 V or less (MAX.) 0.5 A
Output response time
OFF → ON : 0.5 ms or less
ON → OFF : 1.5 ms or less (resistive load)
Surge killer : Zener diode
Protection function : Over load protection function, over voltage protection function, over temperature protection function
Output unit external power supply
Voltage : DC 10.2 to 26.4 V (within 5% ripple rate)
Current : 50mA or less (TYP. DC24V, per common) Does not include external load current
Output common method : 32 points 1 common (Terminal trapezoidal 1-wire type)
Output isolation method : Photocoupler isolation
Dielectric breakdown voltage : Between DC external terminal block and ground: AC500V 1 minute
Insulation resistance : Between DC external terminal block and ground: 10 MΩ or more with DC 500 V insulation resistance tester
Protection grade : IP2X
Station type : Remote I / O station
Number of occupied stations : 1 station
Unit power supply
Voltage : DC 20.4 to 26.4 V (within 5% ripple rate)
Current : 65 mA or less (24 V DC, all points on)
External wiring connection method : Communication unit, unit power supply unit: 7 points 2-piece terminal block (M3 screw) input / output power supply unit, input / output unit: 34 points direct mounting terminal block (M3 screw)
External dimensions
Height(H) : 50 mm.
Width(W) : 179 mm.
Depth(D) : 40 mm.
Mass : 0.25 kg.
