Omron Photoelectric Switch E2E-X1R5E1-Z
Sensing head size : M8
Type : Cylinder type (with screw)、Shielded
Sensing distance : 1.5 mm ±10%
Setting distance : 0 to 1.2 mm
Differential distance : 10% max. of sensing distance
Sensing object : Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object : Iron 8 x 8 x 1 mm
Response frequency : 2 kHz
Power source : DC Three-wires models
Power supply voltage : 12 to 24 VDC (ripple (p-p) 10% max.)
Operating voltage range : 10 to 30 VDC
Current consumption : 13 mA max.
Control output (Output type) : NPN collector load built-in output
Control output (Switching capacity) : 200 mA max.
Control output (Residual voltage) : 2 V max. (Load current 200 mA with cable length of 2 m)
Indicator : Operation indicator (red)
Operation mode : NO
Protective circuit : Output short-cut protection / Reverse polarity protection / Surge suppressor
Ambient temperature:
Operating: -40 to 85℃
Storage: -40 to 85℃
Ambient humidity:
Operating: 35 to 95%
Storage: 35 to 95%
Temperature influence : ±10% max. of sensing distance at 23 ℃ in the temperature range of -25 to 70 ℃ ±15% max. of sensing distance at 23 ℃ in the temperature range of -40 to 85 ℃
Voltage influence : ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance : Between charged parts and the case: 5 MΩ min. at 500 VDC
Dielectric strength : Between charged parts and the case: 1000 VAC 50/60 Hz 1 min
Vibration resistance : Destruction: 10 to 55 Hz, 1.5 mm double amplitude each in X, Y, and Z directions for 2 h
Shock resistance : Destruction: 500 m/s**2 10 times each in X, Y, and Z directions
Degree of protection:
IEC: IP67
Company standard: Oil-proof
Connection method : Pre-wired models (Cable length: 2 m)
Weight Package: Approx. 65 g
Material
Case: Stainless steel (SUS303)
Sensing surface: Polybutylene terephthalate (PBT)
Clamping nuts: Brass nickel plating
Toothed washers: Iron zinc plating
Accessories Instruction manual
