Omron Photoelectric Switch TL-W5MD1
Detection head size : 18 mm x 10 mm x 30.5 mmv Type : Square, non-shielded type
Detection distance : 5 mm ± 10%
Setting distance : 0 to 4 mm
Hysteresis : Less than 10% of detection distance
Detectable object : Magnetic metal (nonmagnetic metal reduces detection distance)
Standard detection object : Iron 18 x 18 x 1 mm
Response frequency : 500 Hz (average value)
Power supply type : DC 2-wire system
Power-supply voltage : DC12 to 24V (Ripple (pp) 10% or less)
Operating voltage range : DC 10 to 30 V
Leak current : 0.8 mA or less
Control output (switching capacity) : 3 to 100 mA
Control output (residual voltage) : 3.3 V or less (load current 100 mA, cord length 2 m)
Indicator light : Operation indicator (red), setting indicator (green)
Action mode : NO
Protection circuit : Load short circuit protection
surge absorption
Ambient temperature range:
When using: -25 to 70 ° C
Storage: -25 to 70 ° C
Ambient humidity range:
When using: 35 to 95% RH
storage: 35 to 95% RH
Temperature effect : Within ± 25 ° C to + 70 ° C, ± 10% or less of detection distance at 23 ° C
Effect of voltage : Within ± 15% of rated power supply voltage, ± 2.5% or less of detection distance at rated power supply voltage
Insulation resistance : Between the charging part and the case: 50 MΩ or more (at DC 500 V mega)
Withstand voltage : Between the charging part and the case: AC 1000 V 50/60 Hz 1 min
Vibration resistance : Durability: 10 to 55 Hz, double amplitude 1.5 mm X, Y, Z directions 2h
Shock resistance : Durability: 500 m / s ** 2 times in each direction of X, Y and Z
Protective structure:
IEC: IP67
internal standard: oil resistant
Connection method : Cord drawer type (cord length: 2 m)
Mass : Packing condition: about 80g
Material:
Case: Heat-resistant ABS
Detection surface: Heat-resistant ABS
Accessories : instruction manual
