Omron proximity switch E2E2-X10MC1
Sensing head size : M18
Type:
Cylinder type
Unshielded
Sensing distance : 10 mm ±10%
Setting distance : 0 to 8 mm
Differential distance : 10% max. of sensing distance
Sensing object : Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object : Iron 30 x 30 x 1 mm
Power source : DC Three-wires models
Power supply voltage : 12 to 24 VDC (ripple(p-p) 10% max.)
Operating voltage range : 10 to 30 VDC
Current consumption : 13 mA max.
Control output (Output type) : NPN open collector
Control output (Switching capacity) : 200 mA (30 VDC max.)
Control output (Residual voltage) : 2 V (Load current 200 mA with cable length of 2 m)
Indicator : Operation indicator (red)
Operation mode : NO
Protective circuit : Output short-cut protection, Power supply reverse polarity protection, Surge suppressor
Ambient temperature:
Operating: -40 to 85 ℃
Storage: -40 to 85 ℃
(no icing)
Ambient humidity:
Operating: 35 to 95%
Storage: 35 to 95%
(no condensation)
Temperature influence : ±10% max. of sensing distance in temperature range of -25 to +70 ℃
±15% max. of sensing distance in temperature range of -40 to +85 ℃
(As the basis for sensing distance of 23 ℃)
Voltage influence : ±1% max. of sensing distance in rated voltage range ±15%.
(As the basis for sensing distance at standard power voltage)
Insulation resistance : Between charged parts and the case: 50 MΩ min. at 500 VDC
Dielectric strength : Between charged parts and the case: 1,000 VAC 50/60 Hz for 1 min
Vibration resistance : 10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h
Shock resistance : 1000 m/s**2 for 10 times each in X, Y, and Z directions
Degree of protection:
IEC: IP67
Company standard: Oil-proof
Connection method : Pre-wired models (Cable length: 2 m)
Weight (Packed state) : approx. 160 g
Material:
Case: Brass
Sensing surface: Polybutylene terephthalate (PBT)
Clamping nuts: Brass nickel plating
Toothed washer: Iron zinc plating
Accessories : Instruction manual
